Fit the Rad wagon 4! I have twins and they love riding on the back of the rad wagon. The bench seat is sold out from rad, but this works fine. The supports aren’t great but is pretty secure right out of the box. Read more

The media could not be loaded.  I use this back seat to take my kid to school every day, and you cannot tight it to the rack because, as shown in the video, the bolts and the inside nuts are loosen. So if you want to fix it you should take apart the base and undo the upholster and tight the bolts from the inside, and at last upholster again. On the other hand, the 2 clamps that come to attach the seat to the bike rack are not of good quality, and its shape is not according to the shape of the rack. Read more

I love this thing for its simplicity. It is pretty big allowing the rider to wiggle around until they find the most comfortable angle and the back rest is pretty solid. Allowing a 180+lb person to comfortable seat on the back and rest their back against it and feel safe on it. It just makes the bike a pain in the butt to fit in the car though. It adds like 7 inches to the height of the back of the bike and makes clearing the top of the car very difficult when trying to load the bike folded, into the car.I just wish the back rest was black instead of white to match. I would paint the white rear bar before installing to make it match and wish it could have been designed in a way where the back could fold down when not in use. All in all, it's a great and basic back seat that works perfectly for a great price. Get it! Read more

The media could not be loaded.  I fully understand this is a $20 seat. I had low expectations going in and would have forgiven some issues.First: the threaded holes for the seat back were installed so far of center there was no way this could be usable or even installed.Second: off the stitching is bad in multiple places.Third: the foam is uneven and has weird dents.Fourth: one of the threaded holes for the main attaching system is totally loose and would be unsafe.Fifth: The brackets to hold it down are razor sharp.Anyone of these problems would be an issue, but all four is not just a one off problem. This is just a poorly made piece that was given no quality control. I would absolutely not trust this seat for my kid. Read more

It does the work. I bought this seat to be able to take my 5yr old. He loves itMounted onto the rail n good to go Read more

I purchased two of these as my partner and I take the kids to school on bikes. It fits perfectly on our cruiser bikes which already had a rear rack built into the bike frame. This product has made going to places with the kids so much easier, except that I didn't purchase the handlebars and the foot pegs that usually comes with it, which I should have (the kids are under 11 years old), so that they don't have to hold on to us when were riding, and their feet are not swaying in the rear of the bike, but eventually they learned to balance themselves and properly place their heels on the bike frame, but still... if purchasing for passengers under 11 the entire set is a must, and of course, helmets.But as an adult passenger, this seat is a butt saver. Just add foot pegs and wear a short skirt and your boyfriend is the most hated man in the neighborhood LOL.I do love this product, we keep getting compliments from it especially when they see the kids riding with us. It's comfortable, however, the bolts need to be checked frequently and depending on your neighborhood if you're parking your bike outside, this seat could get easily stolen. Read more

Installed on a Radcity 16” in about 15 mins feels comfy and sturdy haven’t tested passenger yet but will update to see how long it will last....Update June 30 2020—> Cushing sunk in heard a crack inside not sure if it broke inside but definitely being return not risking a accident on this..... Read more

Pretty much what I expected. I did have to make some simple adjustments to attach it to my bike rack. The attachment brackets were too long for the width of my rack, so I used an angle grinder to shorten them, and filed the ends for a nice finish. I also used my staple gun to clean up the bottom upholstery. Read more

El pedido llegó rápido según lo indicado por Amazon.Es muy fácil de instalar el respaldo y el asiento sobre la bicicleta.En mi caso opté por colocarlo lo más atrás posible y ha ido perfecto.He tenido en cuenta los comentarios de otros usuarios de no apretar demasiado fuerte los tornillos para no tener problemas. En mi caso no ha habido ningún problema si lo apretas lo justo y no te pasas de "forzudo".El crío va super contento y cómodo en su asiento nuevo.Totalmente recomendable.Adjunto fotos para ver como queda y como se instala por la parte de abajo.Si te ha parecido interesante la reseña, marca como "útil".;-) Gracias!! Read more

The timber base is recycled light ply, last used for shuttering concrete...the concrete is still attached. Upholstery is pretty basic. I only needed the head rest component so the right angle bracket was chopped in half with an angle. grinder. This is a good bracket and is probably the best component. For my purposes it will be fine. For moving a child on a cargo bike, it might be ok. The child will have learned to ride a bike by the time it disintegrates. Read more

Does what it says, very comfortable and fits perfectly onto my bike. Read more

Perfect product daughter she’s very happy nice soft good made product Read more

Genial! Llevo usándolo bastante tiempo y no está deformado ni nada (el asiento) . Tan cómodo como el 1er día para el peque (ahora 6 años/22kg). El montaje y dependiendo del portaequipaje es fácil aunque aconsejo no apretarlo demasiado porque dobla las pletinas que vienen: lo he solucionado poniendo una tuerca como tope/marca, luego la pletina y en vez de una tuerca, una palometa con retén que me han salido 50cts. Un apretón muy de vez en cuando y perfecto! Y eso que lo uso a diario...Quizá para niños más pequeños debería traer una cincha a modo de cinto de seguridad, pero se le puede apañar uno fácilmente! Read more